Shure SLX

Smart, Hard-Working Wireless.

Sound installations and working bands need powerful wireless tools that can be set up quickly and used confidently. The rugged SLX® UHF Wireless Systems exceed these demands with innovative setup features such as auto frequency scan with transmitter setup, exceptional wireless clarity, and legendary Shure microphones.

Features

Supporting 20 compatible systems across multiple UHF frequency bands, SLX smoothly integrates into houses of worship, lecture halls, conference rooms, and mobile gear cases.

SLX Wireless Systems feature the Shure patented Audio Reference Companding for clear sound beyond the limits of conventional wireless technology.

Specifications
Band	Range	Transmitter Output
H5	518–542 MHz	30 mW
J3	572–596 MHz	30 mW
L4	638–662 MHz	30 mW
P4	702–726 MHz	30 mW
R13	794-806 MHz	20 mW
R5	800–820 MHz	20 mW
S6	838–865 MHz	10 mW
JB	806–810 MHz	10 mW
Q4	740–752 MHz	10 mW
NOTE: This Radio apparatus may be capable of operating on some frequencies not authorized in your region. Please contact your national authority to obtain information on authorized frequencies for wireless microphone products in your region.

Operating Range Under Typical Conditions	100m (300 ft.) Note: actual range depends on RF signal absorption, reflection, and interference
Audio Frequency Response (+/– 2 dB)	Minimum: 45 Hz Maximum: 15 kHz (Overall system frequency depends on microphone element.)
Total Harmonic Distortion (ref. +/– 38 kHz deviation, 1 kHz tone)	0.5%, typical
Dynamic Range	>100 dB A-weighted
Operating Temperature Range	–18°C (0°F) to +57°C (+135°F)
Note: battery characteristics may limit this range
Transmitter Audio Polarity	Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low impedance output) and the tip of the high impedance 1/4-inch output.
SLX1 Bodypack Transmitter
Audio Input Level	-10 dBV maximum at mic gain position
	+10 dBV maximum at 0 dB gain position
	+20 dBV maximum at -10 dB gain position
Gain Adjustment Range	30dB
Input Impedance	1 MΩ
RF Transmitter Output	30 mW maximum (dependent on applicable country regulations)
Dimensions	108 mm H x 64 mm W x 19 mm D (4.25 x 2.50 x 0.75 in.)
Weight	81 grams (3 oz.) without batteries
Housing	Molded ABS case
Power Requirements	2 “AA” size alkaline or rechargeable batteries
Battery Life	>8 hours (alkaline)
SLX2 Handheld Transmitter
Audio Input Level	+2 dBV maximum at -10dB position
Audio Input Level	-8 dBV maximum at 0dB position
Gain Adjustment Range	10dB
RF Transmitter Output	30 mW maximum (dependent on applicable country regulations
Dimensions (including SM58 cartridge)	254 mm x 51 mm dia. (10 x 2 in.)
Weight	290 grams (10.2 oz.) without batteries
Housing	Molded PC/ABS handle and battery cup
Power Requirements	2 “AA” size alkaline or rechargeable batteries
Battery Life	>8 hours (alkaline)
SLX4 Receiver
Dimensions	42 mm H x 197 mm W x 134 mm D (1.65 x 7.76 x 5.28 in.)
Weight	816 g (1 lb. 13 oz.)
Housing	Galvanized steel
Audio Output Level (ref. +/– 38 kHz deviation with 1 kHz tone)	XLR connector (into 600 Ω load): –13 dBV
	1/4 inch connector (into 3000 Ω load): –2 dBV
Output Impedance	XLR connector: 200 Ω
Output Impedance	1/4 inch connector: 1kΩ
XLR output	Impedance balanced
	Pin 1: Ground (cable shield)
	Pin 2: Audio
	Pin 3: No Audio
Sensitivity	–105 dBm for 12 dB SINAD, typical
Image Rejection	>70 dB, typical
Power Requirements	12–18 Vdc at 150 mA, supplied by external power supply

Brochure

Spec Sheet

User Guide