CROWN CDi Series CROWN COMTECH DRIVECORE

CROWN CNi Series

Engineered from the ground up for unmatched quality and performance, the Crown® CNi Series of power amplifiers offers three models of 500W, 800W, and 1200W per channel at 4 ohms. Onboard digital signal processing includes crossovers, EQ filters, delay and output limiting. Rear panel HD-15 connector provides easy input/output connectivity between CNi amplifiers and the new DSi-8M System Monitor.

The intuitive front panel LCD screen guides installers through a setup process—featuring presets for the industry-standard JBL cinema loudspeaker systems—to make configuration quick and easy.

At the touch of a button, Crown’s CNi cinema amplifiers deliver perfectly matched performance with each award-winning JBL ScreenArray system, making this the ultimate cinema solution. All CNi models are THX® approved.

Features:
•	Includes three models of 475W, 800W, and 1200W per channel at 4 ohms
•	Automatic presets for popular JBL cinema speaker systems for quick, easy configuration
•	Intuitive front-panel LCD screen guides installers through setup
•	Onboard digital signal processing includes crossovers, EQ filters, delay, and output limiting
•	Computer connectivity via USB allows fast setup and configuration with HiQnetTM System ArchitectTM software
•	Rear-panel HD-15 connector provides easy input/output connectivity between CNi amplifiers and new DSi-8M System Monitor
•	All models are THX® approved
•	Switch-mode universal power supply
•	All products fill 2U rack spaces and weigh under 19 pounds
•	Barrier strip outputs, removable Phoenixstyle input
•	Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications

Specifications
Output Power:
CNi 1000 (1 kHz Power)	2Ω Stereo (per channel) : 700W^{* ♦}
	4Ω Stereo (per channel) : 475W
	8Ω Stereo (per channel) : 275W
	4Ω Bridge-Mono : 1,400W^{* ♦}
	8Ω Bridge-Mono : 950W
	With 0.5% THD, ^*With 1% THD, ^♦Not rated for 100V versions.
CNi 2000 (1 kHz Power)	2Ω Stereo (per channel) : 1,000W^*
	4Ω Stereo (per channel) : 800W
	8Ω Stereo (per channel) : 475W
	4Ω Bridge-Mono : 2,000W^*
	8Ω Bridge-Mono : 1,600W
	With 0.5% THD, * With 1% THD.
CNi 4000 (1 kHz Power)	2Ω Stereo (per channel) : 1,450W^*
	4Ω Stereo (per channel) : 1,200W
	8Ω Stereo (per channel) : 650W
	4Ω Bridge-Mono : 3,000W^*
	8Ω Bridge-Mono : 2,400W
	With 0.5% THD, * With 1% THD.
Voltage Gain at 1kHz:
CNi 1000	30.5 dB
CNi 2000	32.9 dB
CNi 4000	34.2 dB
Frequency Response	+0/–1 dB from 20 Hz to 20 kHz at 1 watt into 4 ohms.
Load Impedance	Safe with all types of loads. Rated for 2 to 8 ohms in Stereo mode, 4 to 16 ohms in Bridge-Mono mode. CNi 1000 A1 (100V version) is rated for 4 to 8 ohms in Stereo mode, 8 to 16 ohms in Bridge-Mono mode.
Sensitivity:
At 8 ohm rated output	CNi 1000 : 1.4V
	CNi 2000 : 1.4V
	CNi 4000 : 1.4V
At 4 ohm rate output	CNi 1000 : 1.3V
	CNi 2000 : 1.2V
	CNi 4000 : 1.3V
At 2 ohm rated output	CNi 1000 : 1.1V
	CNi 2000 : 1.0V
	CNi 4000 : 1.0V
Signal to Noise Ratio (below rated 8-ohm power at 1 kHz)	CNi 1K, 2K, 4K: 100 dB (A weighted). CNi 6K: 103 dB (A weighted).
Damping Factor	Better than 500 from 20 Hz to 400 Hz.
Crosstalk	> 70 dB below rated power, 20 Hz to 1 kHz, A-weighted.
Input Stage	Input is electronically balanced and employs precision 1% resistors.
Input Impedance (nominal)	20 k ohms, balanced; 10 k ohms, unbalanced.
AC Line Voltage and Frequency Configurations Available	100V, 120V, 220-240V, 50/60 Hz.
AC Line Current:
CNi 1000	6.8A
CNi 2000	8.3A
CNi 4000	10.5A
At Idle	Draws no more than 38 watts.
Operating Temperature	0° C to 40° C at 95% relative humidity (non-condensing).
Dimensions	EIA Standard 19-in. rack mount width (EIA RS-310-B), 3.5 in. (8.9 cm) high and 12.25 in. (31.11 cm) deep behind mounting surface.
Net Weight	19 lb (8.6 kg)
Shipping Weight	22 lb (10.0 kg)

Documents Download

Brochure

Manufacturer Statement