JBL AL6115

AL6115 is a high power, low frequency loudspeaker system comprised of one 380 mm (15 in) VGC Vented Gap Cooled low frequency driver in a front-loaded, vented configuration. The trapezoidal cabinet is fitted with M10 threaded suspension points. Pre-engineered array bracketry is available.

AL6115 is part of JBL’s AE Application Engineered Series, a versatile family of loudspeakers for a wide variety of applications.

Key Features:
•	1 x 15" 2226H VGC™ Driver.
•	Large vent area for high output with low distortion.
•	Arrays with various AE Series mid-high frequency and compact 2-way models (see AE Series Array Guide).

Specifications:
System:
Frequency Range (-10 dB)	40 Hz – 2.5 kHz
Frequency Response (±3 dB)	47 Hz – 2.1 kHz
Transducer Power Rating (AES) ¹	1000 W (4000 W peak), 2 hrs
Long-Term System Power Rating ²	600 W (2400 W peak), 100 hrs
Maximum SPL ³	50 Hz –125 Hz: 129 dB-SPL cont avg (135 dB peak) 125 Hz – 800 Hz: 127 dB-SPL cont avg (133 dB peak)
System Sensitivity (dB-SPL, 1W @ 1m) ⁴	50 Hz – 125 Hz: 99 dB 125 Hz – 800 Hz: 97 dB
Nominal Impedance	8 ohms
Transducers:
Low Frequency Driver	1 x JBL 2226H 380 mm (15 in) VGC™ driver with 100 mm (4 in) voice coil
Physical:
Enclosure	Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply Finnish birch plywood
Suspension Attachment	13 points (3 top, 3 bottom, 2 each side, 3 rear), M10 threaded hardware
Finish	Black DuraFlex™ finish. White available upon request.
Grille	Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.
Input Connector	NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.
Environmental Specifications	Mil-Std 810; IP-x3 per IEC529.
Dimensions (H x W x D in vertical cabinet orientation)	548 x 561 x 657 mm (21.6 x 22 1 x 25.9 in)
Net Weight	29.0 kg (64 lb)
Optional Accessories	M10 x 35 mm forged shoulder eyebolts with washers. Optional planar array frame kit. See AE Series Bracket Guide

¹ AES standard, one decade pink noise with 6 dB crest factor within device's operational band, free air. Standard AES 2 hr rating plus long-term 100 hr rating are specified for low-frequency transducers.
² AES standard, one decade pink noise with 6 dB crest factor, in cabinet, long-term 100 hr rating.
³ Calculated based on power rating and sensitivity, exclusive of power compression.
⁴ Half-space (2) loading, averaged in specified frequency band.
JBL continually engages in research related to product improvement. Changes introduced into existing products without notice are an expression of that philosophy.

Brochure

Spec Sheet