JBL AM4215/95

AM4215/95 is a medium power 2-way full-range loudspeaker system comprised of one 380 mm (15 in) low frequency driver and one 38 mm (1.5 in) exit/38 mm (1.5 in) voice-coil compression driver. The large PT Progressive Transition waveguide provides well-controlled 90° by 50°coverage and is rotatable for cabinet positioning in either horizontal or vertical orientation. High-slope crossovers minimize band overlap and well-controlled off-axis response enhances arrayability.
The cabinet is fitted with M10 threaded suspension points. Optional U-bracket is available for easy installation.
AM4215/95 is part of JBL’s AE Application Engineered Series, a versatile family of loudspeakers for a wide variety of fixed installation applications.

Key Features:
•	90° x 50° Coverage, rotatable for use in either vertical or horizontal orientation.
•	Large PT™ Progressive Transition™ Waveguide for excellent pattern control with low distortion.
•	Bi-Amp/Passive Switchable.
•	Optional U-Bracket for easy installation (see AE Series Bracket Guide).

Specifications:
System:
Frequency Range ¹ (-10 dB)	40 Hz – 20 kHz
Frequency Response ¹ (±3 dB)	45 Hz – 18 kHz
Coverage Pattern	90° x 50°, rotatable waveguide
Directivity Factor (Q)	12.6
Directivity Index (DI)	11 dB
Crossover Modes	Bi-amp/Passive switchable
Passive Crossover Slopes ²	4th order (24 dB/oct) Linkwitz-Riley HP & LP, 1.3 kHz
Transducer Power Rating (AES) ³	LF: 500 W (2000 W peak), 2 hrs 350 W (1400 W peak), 100 hrs
Transducer Power Rating (AES) ³	HF: 35 W (140 W peak), 2 hrs
Long-Term System Power Rating (IEC)⁴	Passive mode: 350 W (1400 W peak), 100 hrs
Maximum SPL⁵	Bi-amp mode: LF: 124 dB-SPL cont avg (130 dB peak) HF: 128 dB-SPL cont avg (134 dB peak)
Maximum SPL⁵	Passive mode: 124 dB-SPL cont avg (130 dB peak)
System Sensitivity ⁶ (1W @ 1m)	Passive mode: 97 dB SPL
Transducers:
Low Frequency Driver	1 x JBL 2033H 380 mm (15 in ) driver with 75 mm (3 in) voice coil
Nominal Impedance	8 ohms
Sensitivity6 (1W @ 1m, within operational band)	97 dB SPL
High Frequency Driver	JBL 2407H/MTA, 38 mm (1.5 in) exit compression driver, 38 mm (1.5 in) voice coil
Nominal Impedance	8 ohms
Sensitivity (1W @ 1m)	113 dB SPL
Waveguide	PT-H95HF
Physical:
Enclosure	Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply Finnish birch plywood
Suspension Attachment	15 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded hardware
Finish	Black DuraFlex™ finish. White available upon request.
Grille	Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.
Input Connector	NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.
Environmental Specifications	Mil-Std 810; IP-x3 per IEC529.
Dimensions (H x W x D in vertical cabinet orientation)	783 x 422 x 504 mm (30.8 x 16.6 x 19.9 in)
Net Weight	29.0 kg (64 lb)
Optional Accessories	M10 x 35 mm forged shoulder eyebolts with washers U-Bracket MTU-1

¹ Bi-amp mode, with recommended active tuning.
² Resultant engineered acoustical response of crossover network and components.
³ AES standard, one decade pink noise with 6 dB crest factor within device's operational band, free air. Standard AES 2 hr rating plus long-term 100 hr rating are specified for low-frequency transducers.
⁴ IEC standard, full bandwidth pink noise with 6 dB crest factor, 100 hours.
⁵ Calculated based on power rating and sensitivity, exclusive of power compression.
⁶ Anechoic sensitivity in free field, no additional sensitivity gain from boundary loading.
JBL continually engages in research related to product improvement. Changes introduced into existing products without notice are an expression of that philosophy.

Brochure

Spec Sheet