Shure PSM200

Whether you're playing live or rehearsing, you need to hear yourself to be your best. That's what monitoring is all about. Yet some performers still struggle with booming floor wedge monitors and loud stage volume. Introducing the PSM 200 - the personal monitoring break through that performers have been waiting for. Featuring smart, versatile components that grow with you as your needs change, the PSM 200 series is a practical alternative to floor wedges for performers who want to start out In Ear and stay there.

The P2R Hybrid Bodypack Receiver is the world's first bodypack receiver to function as a wired receiver, a wireless receiver, or both at the same time. This and other unique features, along with excellent sound quality, make the P2R an exceptional value.

The P2T Wireless TransMixer is another breakthrough design for in-ear monitoring. It allows the user to connect two line-level or mic–level inputs directly into the transmitter. The two signals can then be mixed independently. You can connect microphones or instruments directly to the inputs, use line outputs from a mixing console, or connect it to Shure's AuxPander. In short, no matter what the output device, you can probably plug it into the TransMixer.

The PSM 200 model P2TRE2 wireless personal monitor system with mix control consists of the P2T Wireless Transmixer, the P2R Hybrid Bodypack Reciever, and the E2 Dynamic Driver Earphones

Features:
P2T Wireless TransMixer
The P2T TransMixer is breakthrough design for in-ear monitoring. It allows the user to connect two line-level or miclevel inputs directly into the transmitter. The two signals can then be mixed independently. You can connect microphones or instruments directly to the inputs, use line outputs from a mixing console, or connect it to Shure's AuxPander. In short, no matter what the output device, you can probably plug it into the TransMixer.
Key Features
•	Built-in audio limiter
•	Front mounted antenna
•	Two mic/line input channels for mix control
•	1/2 Rack space
Operating Controls
•	Input level control
•	Frequency select
LED Indicators
•	Tri-color input level
•	Frequency
Inputs
•	Two Mic/line, XLR-1/4 in. combo input channels
Outputs
•	Two XLR split outputs
P2R Hybrid Bodypack Receiver
The P2R Receiver is the world's first bodypack receiver to function as a wired receiver, a wireless receiver, or both at the same time. This and other unique features, along with excellent sound quality, make the P2R an exceptional value.
Key Features
•	Can operate as a wired or wireless bodypack, or both simulaneously
•	Frequency locator
•	Built-in headphone limiter
•	Integrated cable management
•	High-impact plastic chassis
•	1/4" Line inpit jack with high/low gain switch
Operating Controls
•	Volume knob
•	Frequency select
LED Indicators
•	Power
•	RF reception
•	Frequency
•	Limiter
•	Low Battery
E2 Dynamic Driver Earphones
Single high energy drivers deliver full range sound and isolation from outside noise.
Specifications
•	Transducer Type: dynamic high energy
•	Sensitivity (at 1 kHz): 105 dB SPL/mW
•	Impedance (at 1 kHz) 16 ohms
•	Output Connector: Gold-plated stereo, 3.5 mm (1/8-inch) phone plug
•	Cable Length: 1.57 m (62 inches)

Specifications:
PSM200 System
RF Carrier Frequency Range	518865 MHz (country dependent)
Operating Range	100 m (300 ft.) under optimal conditions
Audio Frequency Response	30 Hz to 12 kHz (+/3 dB); earphone dependent
Total Harmonic Distortion (1 kHz)	<1% typical (Ref. +/- 35 kHz deviation)
Modulation	FM +/- 35 kHz Deviation (Nominal)
Signal-to-Noise Ratio	80 dB typical (A-weighted)
Operating Temperature	7 degrees C to +49 degrees C (+20 degrees F to +120 degrees F)
P2T TransMixer
RF Output Power	30 mW (+15 dBm) typical conducted (country dependent)
Modulation Limiter	Internal peak limiter (>10:1 hard knee compression)
Antenna	1/4 Wavelength, semi-rigid, PCB Mount
P2T Audio Input	Connector Type: XLR/1/4-inch combo
	Configuration: electronically balanced
	Actual Impedance: 1 kilohm
	Nominal Input Level: 25 dBu @ 1/2 volume (12 o'clock)
	Maximum Input Level: 5 dBu @ 1/2 volume (12 o'clock)
Pin Assignments	XLR: 2=hot; 3=cold, 1=ground
Pin Assignments	1/4: Tip = hot, Ring = cold, Sleeve=ground
Phantom Power Protection?	Yes: Up to 52 Vdc
Current	170 mA maximum
Dimensions	220 mm x 140 mm x 40 mm (8.6 in. x 5.6 in. x 1.7 in.)
Net Weight	370 g (13 oz.)
P2T Audio Outputs Passive connection parallel with input.
Connector Type	XLR
Configuration	electronically balanced
Pin Assignments	2 = hot ; 3 = cold, 1 = ground
Phantom Power Protection?	Yes: Up to 52 Vdc
Power Requirements	Operating voltage 12-18 Vdc
Supplied with one of the following external power supplies:
Model PS20:	120 VAC, 60 Hz input.
Model PS20E, Model PS20UK: .	230 VAC, 50/60 Hz input
P2R Receiver
RF Sensitivity	109 dBm typical
Squelch Threshold	102 dBm typical
Antenna	Attached Whip
Audio Input Connector	Connector Type: 1/4-inch Mono
	Impedance: 1 megohm
	Maximum Input Level: LO = +0 dBu; HI = 10 dBu
	Frequency Response: 30 Hz to 20 kHz (+/3 dB); earphone dependent
Power Requirements	9 V alkaline battery, Duracell® type MN1604 recommended
Battery Life	Volume Dependent
Wired (RF Off):	6 hours
Wireless (RF On):	4 hours
Audio Output Connector	1/8 inch (3.5 mm)
Minimum Load Impedance	8 ohms
Net Weight	100 g (3.52 oz.), less battery
Overall Dimensions	122 mm x 73 mm x 32 mm (4.809 in. x 2.875 in. x 1.251 in.)

User Guide