Shure PGX

Unplugged. Uncompromising.

It's never been easier to go wireless and sound like a pro. Shure PGX Wireless brings the superior sound of Shure Microphones together with innovative automatic setup features in nine easy-to-use packages.

Features

Durably constructed, with 12 compatible systems (multiple bands) and included carrying case, PGX is the perfect system for performers on the go who want worry-free performance, every time.

Specifications
System
Working Range	100m (300 ft.) Note: actual range depends on RF signal absorption,reflection, and interference
Audio Frequency Response	+/– 2 dB Minimum: 45 Hz Maximum: 15 kHz (Overall system frequency depends on microphone element.
Total Harmonic Distortion	Ref. +/– 33 kHz deviation, 1 kHz tone 0.5%, typical
Dynamic Range	>100 dB A-weighted
Operating Temperature Range	–18°C (0°F) to +50°C (+122°F) Note: battery characteristics may limit this range
Transmitter Audio Polarity	Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low impedance output) and the tip of the high impedance 1/4-inch output.
PGX1 BodypackTransmitter
Audio Input Level	–10 dBV maximum at "mic" gain position +10 dBV maximum at 0dB gain position +20 dBV maximum at –10dB gain position
Gain Adjustment Range	30 dB
Input Impedance	1 MΩ
RF Transmitter Output	30 mW maximum (dependent on applicable country regulations)
Dimensions	108 mm H x 64 mm W x 19 mm D (4.25 x 2.50 x 0.75 in.)
Weight	81 grams (3 oz.) without batteries
Housing	Molded polycarbonate case
Power Requirements	2 “AA” size alkaline or rechargeable batteries
Battery Life	>8 hours (alkaline)
PGX2 Handheld Transmitter
Audio Input Level	+2 dBV maximum at –10dB position –8 dBV maximum at 0dB position
Gain Adjustment Range	10dB
RF Transmitter Output	30 mW maximum (dependent on applicable country regulations)
Dimensions including SM58 cartridge	254 mm x 51 mm dia. (10 x 2 in.)
Weight	290 grams (10.2 oz.) without batteries
Housing	Molded PC/ABS handle and battery cup
Power Requirements	2 “AA” size alkaline or rechargeable batteries
Battery Life	>8 hours (alkaline)
PGX4 Receiver
Dimensions	40 mm H x 181 mm W x 104 mm D (1.6 x 7.125 x 4.1 in.)
Weight	327 g (11.5 oz.)
Housing	ABS
Audio Output Level (ref. +/– 33 kHz deviation with 1 kHz tone)	XLR connector (into 600 Ω load): –19 dBV 1/4 inch connector (into 3000 Ω load): –5 dBV
Output Impedance	XLR connector: 200 Ω 1/4 inch connector: 1kΩ
XLR output	Impedance balanced Pin 1: Ground (cable shield) Pin 2: Audio Pin 3: No Audio
Sensitivity	–105 dBm for 12 dB SINAD, typical
Image Rejection	>70 dB, typical
Power Requirements	12–18 Vdc at 150 mA, supplied by external power supply

User Guide