DBX iEQ31

With an EQ heritage that has produced countless industry-standard patents and dates back more than 30 years, the dbx iEQ-31 easily lives up to the dbx® legacy of uncompromised sonic integrity. In addition to unsurpassed equalization specs, the iEQ-31 also offers the built-in necessities which include AFS™ feedback Suppression, Type V™ noise reduction and PeakStopPlus® limiting. Besides including two 31-band channels of 1/3-octave equalization, the iEQ-31 also offers +12 dB input gain range; switchable +6 or +15 dB boost/cut range, 40mm faders, XLR, 1/4'' and Euroblock inputs and outputs, nonconductive nylon sliders; and an intuitive user interface with comprehensive output and gain reduction metering. As always, the inevitable result of our meticulous attention to detail and top-quality componentry is exceptional sound, performance, and reliability.

The iEQ series represents a major step forward in the performance of graphic equalizers. The iEQ series is now able to offer state-of-the-art digital EQ performance and specs with an analog look and feel. From its amazing 10Hz to 22kHz frequency response, to its 113dB dynamic range and Advanced Feedback Suppression (AFS™), dbx proprietary Type V™ noise reduction and PeakStopPlus® limiting, the iEQ-31 offers out of this world specifications with a down-to-earth price point. Sure to find a home in the studio, on tour and with installed sound venues, the iEQ-31 is destined to take its rightful place in the lineage of great dbx® signal processors that are the professional’s choice in signal processing. With such pristine design and quality, the iEQ-31 offers the maximum sonic flexibility in a straight forward interface and rock-solid construction.

FEATURES

•	Advanced Feedback Suppression (AFS™)
•	1/3-octave Constant Q frequency bands
•	Switchable boost/cut ranges of +6 or +15dB
•	18 dB per octave 40Hz low-cut filter
•	XLR, TRS and Euroblock Inputs and Outputs
•	Relay Bypass for Power Failure System Protection
•	Type V™ Noise Reduction
•	PeakStopPlus® Limiting
•	+12dB input gain range
•	Internal Toroidal Transformer
•	User Power Up Features
•	Dyanmic range of greater than 113dB

SPECIFICATIONS

INPUT
Connectors	1/4" TRS, female XLR (pin 2 hot), and Euroblock
Type	Electronically balanced/unbalanced, RF filtered
Impedance	Balanced 40k ohm, unbalanced 20k ohm
Max Input Level	>+22dBu balanced or unbalanced
CMRR	>40dB, typically >55dB at 1kHz
OUTPUTS
Connectors	1/4" TRS, male XLR (pin 2 hot), and Euroblock
Type	Balanaced/unbalanced, RF filtered
Impedance	Balanced >120 ohm, unbalanced >60 ohm
Max Output Level	>+20dBu balanced/unbalanced into 2k ohm or greater
SYSTEM PERFORMANCE
Frequency Response	20Hz to 20kHz, +0.5/-0.25dB
Dynamic Range	>113dB, "A" weighted
THD+Noise	<0.003%, typical at +4dBu, 1kHz
Interchannel Crosstalk	<-80dB, 20Hz to 20kHz
Noise Reduction	Up to 10dB of dynamic broadband noise reduction
Digital Resolution	24 bits
Sample Frequency	48khz
Latency	2msec
POWER SUPPLY
Operating Voltage	120VAC 60Hz, 220-240VAC 50/60Hz
Power consumption	17W
Main Connection	IEC receptacle
Dimensions	5.25" H x 19" W x 7.9" D

Note: Specifications subject to change without notice.

Document

Cut Sheet

Manual